====== Ubnt ======

= verze FW =
M-M tak je tam nejlepší XM-5.5.11 a XW-5.5.10u2, když máš AC-M nebo AC-AC tak je nejlepší nejnovější

= airos =
The config file is located at “/tmp/system.cfg”. To edit the file, use VI.

vi /tmp/system.cfg

Once you have edited your config file, you must save it to flash:

cfgmtd -f /tmp/system.cfg -w

Once you have saved it you can reboot by issuing the “reboot” command or you can do a soft apply:

/usr/etc/rc.d/rc.softrestart save

====== Odstranění viru Skynet ======
<code>0@@</code>

====== Zapnutí short preamble ======
nový chipset u NanoBeam umí i short preamble.

 XW.v5.5.6# iwpriv ath0 | grep pream
    shpreamble       (003E) : set   1 int   & get   0
    get_shpreamble   (003E) : set   0       & get   1 int
 XW.v5.5.6# iwpriv ath0 get_shpreamble
 ath0      get_shpreamble:1
 XW.v5.5.6# iwpriv ath0 shpreamble 0
 XW.v5.5.6# iwpriv ath0 get_shpreamble
 ath0      get_shpreamble:0
 XW.v5.5.6# iwpriv ath0 shpreamble 1
 XW.v5.5.6# iwpriv ath0 get_shpreamble
 ath0      get_shpreamble:1
 XW.v5.5.6#


= mFI mPort =

Pinout of connectors is described on http://wiki.ubnt.com/MFi-Custom_Sensors

====== How to remotely switch on/off supply voltage' ======
set 12V for 3 seconds on all ports stored in /etc/persistent/roleta
 #set 12V
 echo 0x152C70 > /proc/gpio/sr_val
 sleep 3
 #set 0V
 echo 0x100000 > /proc/gpio/sr_val

invoked remotely by
 ssh ubnt@192.168.1.20 /etc/persistent/roleta

Examples are stored in /usr/www/mfi/ and all seems to be under heavy development

 MF.v1.0.3# cat README
 FILES
 
 common.cgi:
  A set of standard functions
 
 USAGE
 Functions can be executed from CGI or the command line
 
 Command Line Example:
  1) wget -qO- "localhost/digitalWrite.cgi?pin=0&value=1&debug=1" | cat
 
  2) cgi -q test.cgi
 
  3) Add first line to top of file
    #!/usr/bin/cgi
    ./test.cgi